With the Bosch ConnectModule retrofit kit, you can reliably determine the location of your e-bike via GPS. In addition to the tracking function, the ConnectModule also has an alarm function. A warning tone sounds in the event of slight movements and as soon as the bike is moved or subjected to severe vibrations, the alarm is triggered and you receive a push notification via the E-Bike Flow app.

Features of the Bosch ConnectModule (BCM3100) for BDU38YY

• The ConnectModule is the mandatory technical requirement for eBike Alarm
• Invisibly installed on the eBike
• Radio and GNSS module, own battery and motion sensors
• Following installation, eBike Alarm, the premium service from Flow+, can be enabled and used via the eBike Flow app

Technical data

System: The Smart System
Model year: MY2025

Please note: Installation and all repairs to the ConnectModule may only be carried out by authorised specialist dealers. This requires specialised expert knowledge. Incorrect installation can lead to the ConnectModule or the eBike no longer being operated in compliance with the law.

The Connect Module can be retrofitted to eBikes with the smart system, provided that the eBike manufacturer's approval has been granted in the Bosch DiagnosticTool 3 via the 'Connect Module ready' entry.

Not compatible with cable cover EB112000KJ

Scope of delivery:

1x ConnectModule EB1310000B
1x Mounting plate EB13900019
1x Screw for mounting plate EB13200031
1x Bracket EB13900018
1x Cable 100 mm EB1212003S
1x Screw EB112000TA
1x Operating and installation instructions